STM32 (Bluepill) with i2c bme280


Sample code stm32duino upload via stlink

#include <Wire.h>
#include <SPI.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>

Adafruit_BME280 bme;

void setup() 
{
    Serial.begin(115200);
    bme.begin(0x76); //i2c address must declare,or try i2c scanner first
}
void loop() 
{
    Serial.print("Temperat: ");   
    Serial.println(bme.readTemperature(),1);
    Serial.print("Humidity: ");
    Serial.println(bme.readHumidity(),1);
    Serial.print("Pressure: ");     
    Serial.println((bme.readPressure()/100),1);              
    delay(1000);
}

Rumus menghitung panjang antenna LoRa 923 Mhz untuk monopole antenna


Detailnya silahkan lihat video diatas

Dan untuk diindonesia karena menggunakan Freq 920-923 kira kira panjang antena yang digunakan adalah sekitar 7,79 – 7,81 cm

Happy Coding

Salam Ngoprek

5$ DIY radiation shield


I made some fun project for weather monitoring for measuring temperature, humidity, pressure using BME 680, lora modul and my first sensor like this

And after a couple days i realize the sensor measuring temperature is too high maybe because sensor measuring inside the box, after googling and looking other solution and my idea is making radiation shield and i end up with DIY radiation shield using some cheap plastic plates.

I bought 2$ for 8 plastic plates but i only use 6 because my sensor is small, and i also buy some spacer for mounting the plates its 2$ for 20 spacer i’m using 1 inches spacer, and 1$ for other material like cable ties and also spray paint

And this is it my cheap radiation shield 🙂 and i’m happy for the result

Happy Coding

Salam ngoprek